6100 Synergie+ Motul 103728

Application. Motor oil formulated by Technosynthese® technology. It is specially developed for modern cars equipped with powerful, high-volume, gasoline and diesel engines, turbocharged and not, with direct fuel injection and exhaust gas recovery system. It is used in the engines operating on all grades of gasoline, diesel and LPG. Features. Standards: ACEA A3//B4 API SL/CF. Approvals: VW 502.00 - 505.00 MB 229.3. Its lubricating property is improved by the synthetic base which ensures a very high lubricating level, minimizes friction, volatility and provides resistance to high temperatures in modern engines. The ACEA B4 standard requires an outstanding detergent and dispersant capacity and a better viscosity increase resistance due to soot produced by direct injection diesel engines. The API SL standard - compared with API SJ - imposes more stringent requirements to the motor oils in terms of aging resistance (especially at extended change intervals), anti-oxidant properties, viscosity stability, prevention of deposits and sludge, anti-wear, detergent and dispersive properties. The VW 502 00 and VW 505 00 standards cover all gasoline engines produced after 1996 and all diesel engines, including turbocharged without a pump duse, made by VW with the set change intervals (15 000 km or 1 year). The MB 229.3 standards imposes more stringent requirements than 229.1 in terms of oil aging resistance (the extended change interval: according to the on-board computer values) and stipulates energy saving capabilities of the oil: 1.2% compared with the 15W-40 viscosity grade oils. It has anti-oxidant, anti-wear, anti-corrosive, anti-foaming properties. Benefits for the engine and environment. The oil is changed according to the manufacturer’s recommendations for the engine and can be adjusted depending on your own use. It can be mixed with synthetic and mineral lubricants. Physical and chemical properties. Viscosity grade, SAE J 300: 5W-40. Density at 15°C (59°F), ASTM D1298: 0.853 g/cm3 Viscosity at 40°C (104°F), ASTM D445: 96.8 mm2/c Viscosity at 100°C (212°F), ASTM D445: 15.1 mm2/c Dynamic viscosity at 150 °C (HTHS), ASTM D4741 4.03 mPa.s Viscosity index, ASTM D2270: 164 Pour point, ASTM D97: -36°C / -32.8°F Flash point, ASTM D92: 234°C / 453.2°F Sulfated ash, ASTM D874 1.07% of mass. Base number, ASTM D2896: 8.9 mg KOH/g