Sealant Abro SS-1200

100% silicone universal sealant ABRO 1200 is a long-lasting adhesive sealant based on vinegar acid, used for various purposes in internal and external works. The silicone sealant has high adhesion to most metals, painted surfaces, non-oily wood, plastic, rubber, glass, porcelain, and ceramics. After hardening, the silicone sealant becomes water-resistant, preserves elasticity, is resistant to mechanical and temperature impacts (from -50 to +200°C). It is ideal for sealing fish bowls. In case of work with porous surfaces (concrete, brick, stone, etc.), use the construction neutral silicone sealant ABRO 1500. In case of plumbing works, use the silicone sealant ABRO 1000 with special anti-mildew additives. Instructions: The surface must be clean, dry, and non-greasy. Cut the tip of the cartridge and screw the applicator. Cut the applicator to the necessary hole size at 45° angle. Squeeze the silicone sealant holding the cartridge at 45° angle to the surface. Maximum comfort for application of the silicone sealant thanks to a special sealant gun. Remove excess of the silicone sealant with a paper wipe or fabric wet with alcohol. Cut the hardened silicone sealant with a sharp knife or a scraper. In about 5 minutes after the application of the silicone sealant, the film is formed on the surface. The silicone sealant hardens fully in 24 hours. Repeated sealant usage: In case of incomplete usage, squeeze a drop of the silicone sealant. During the repeated application, remove the dried-up plug. It is difficult to paint this product. The fully hardened product is safe.