Agent for drive belts CRC 10.081.1.11.12.58

It prevents slippage of belts of all types. CRC Belt Grip is a product based on a synthetic polymer and meeting all the requirements set to belt lubricants used for industrial and food production equipment. This product extends the service life of belts and pulleys thanks to the improved grip power and operation with the less tensioned belt. It prevents slippage of flat, round and V-shaped belts. It is well absorbed by all materials. It makes the belt strong and improves transmission. It eliminates squeaking which irritates in case of belt slippage. It forms a sticky, non-drying, water-repellent film resistant to chemical substances. It can be applied on all the most popular types of belt materials (rubber, leather, felt, etc.). Aerosol bottles have a valve (it operates in any bottle position) and an additional tube for convenient application. Aerosol is under pressure of the flammable propellent CO2 which allows you to use the full bottle volume on 97%. It fully eliminates slippage of flat, round and V-shaped belts made of rubber, leather, felt, plastic, etc. and used in Compressors. Pumps. Generators. Fans. Engines. Cars. Lifters. Conveyors. Industrial mechanisms. Before using the product, turn equipment off and stop the belts. Apply the product with a thin even layer on the pulley side of the belt (the sides which contact with the pulleys); wait for the solvent evaporation before re-starting the equipment. Apply the product recurrently to ensure continuous reliable equipment operation. If it is necessary, remove the product using CRC Fast Dry Degreaser or CRC Industrial Degreaser (before applying them, check their compatibility with rubber and plastic). Store at a room temperature in the manufacturer’s packing, do not expose to the sun rays and temperatures higher than 50*C. Keep out of the children’s reach.