Oil system cleaners Wynn's W47244

Oil System Cleaner is an additive soluble in oil and used for cleaning and protecting lubrication systems and preventing contamination of fresh oil with residues of the used oil. Properties: It dissolves deposits and maintains them in the suspended condition. It cleans the engine, hydraulic systems, gearboxes and differentials. It prevents sticking of piston rings and seizing of hydraulic valve lifters. It prevents contamination of the fresh oil with residues of the used one. It protects from wear. It does not damage catalysts. Application: For gasoline and diesel engines with and without turbochargers and for stationary equipment. In all hydraulic systems and joints. In transmissions (not automatic), differentials, drive gears and transfer cases. Instructions: Engines: add Wynn’s Oil System Clean in motor oil in the warmed-up engine. Let the engine run in the idle mode from 10 to 20 minutes. Stop the engine. Replace the oil filter and oil (according to the manufacturer’s instructions). Transmission (manual), differentials, main drives, transfer cases: add 5% Wynn’s Oil System Cleaner in oil. Drive from 1 to 8 hours without engine overloading. Change the oil. Hydraulic system: add 5% Wynn’s Oil System Cleaner in oil. The long-term additive effect depends on the oil operating temperature. Replace the oil. Remarks: If the engine mileage is more than 100 000 km, it is recommended to use Hydravlic Valve Lifter Concentrate in case of using various oils, irregular oil changes. After that, you can flush the oil system with Wynn’s Oil System Cleaner.