Brake cleaners CRC 10.128.1.16.12.58

CRC BRAKLEEN, a brake cleaner. Strong, cleaner and degreaser for brake and clutch parts. It is a chlorine-free solvent which quickly and safely removes brake fluid, oil, fat and other contaminants from brake and clutch mechanisms. BRAKLEEN product helps in extending the service life and improving performance of brakes. It efficiently removes brake fluid, oil, fat and hardened dead spots. It immediately de-greases. It eliminates squeak of brake pads and vibrations during power shifting. It can be applied on the whole unit without its disassembly which saves time and significantly reduces maintenance costs. It quickly evaporates. It does not leave marks. Thanks to the low surface stress, the product quickly gets absorbed and has excellent dissolving and degreasing properties. It does not colour metal and does not cause corrosion. It is safe for most painted, plastic and rubber surfaces (it is recommended to check before application). Aerosol is under pressure of the flammable propellent CO2 which allows you to use the full bottle volume on 97%. Aerosol bottles have a valve (it operates in any bottle position) and an additional tube for convenient application. Application: CRC BRAKLEEN is ideally suitable for cleaning and degreasing brake pads, drums, cylinders, brake linings, disc brake linings, discs, wedge brakes, clutch plates, springs. Tracks. Equipment. Parts and tools. Instructions for application: CRC BRAKLEEN. Spray the product richly on the surface and let it drain. Let it dry in the open air or wipe with an absorbent cloth. Repeat if it is necessary. Use a special additional applicator for hard-to-reach places. After application, lubricate with CRC 5-56 product repeatedly if it is required. Before application of this product on plastic and rubber, check its compatibility with these materials. Do not use on sensitive electronic devices. To clean such equipment, it’s better to use one of the specialized CRC Precision Cleaners. Use in a well ventilated room. Do not use on working equipment. Thoroughly dry the surface and blow it with compressed air before re-starting the system.