Oil system cleaners Xado XA 40201

VitaFlush is used for cleaning the oil system of gasoline and diesel engines of all types (including turbocharged ones), transmission units. It fully removes all contaminations, resins from the channels and drain them together with the used oil. The revitalizant returns up to 70% of the lost metal on its place. It is used during oil change as a preventive product for flushing and protection from wear and as an adaptation flusher in case of switching to the oil of other viscosity, other grade (e.g., from mineral to synthetic), of other manufacturer. It cleans the engine oil system (transmission units) from contamination of all types. It restores mobility of oil rings and compression rings. It eliminates slippage of hydraulic lash adjusters. It cleans the ventilation system of the crankcase. It restores and protects from wear of rubbing parts. It increases the engine power. It stabilizes oil pump parameters (it increases oil pressure). 1. Add necessary amount of XADO VitaFlush in the warmed-up mechanisms through the oil filler or oil measuring hole. 2. Start the engine and ensure its idle run within 10 - 15 minutes or drive 20 km. Drive 200-300 km if thorough flushing is required (heavy dirt). 3. Replace oil and the oil filter. Remarks. For the maximum effect, use at each oil replacement. In case of regular application - 1 package of the intensive cleaner for 1 liter of oil / 60 ml of the cleaner for 1 liter of oil. In case of heavy dirt - 2 packages of the intensive cleaner for 1.5 liter of oil / 100 ml of the cleaner for 1 liter of Xado VitaFlush is compatible with all types of oils. Xado VitaFlush does not comprise acids, acetone and solvents. It is safe for non-metal engine parts, lambda sensors and catalytic convertors.