Oil system cleaners Motul 102174

MOTUL Engine Clean is used for all types of gasoline engines: injected, carbureted, turbocharged, naturally aspirated, with and without a catalyst, run on leaded and unleaded fuel. MOTUL Engine Clean allows you to efficiently remove dirt and deposits from the engine, dissolve them to the micro-particles, convert in suspended condition and drain together with the old oil. MOTUL Engine Clean ensures additional high-level lubrication during the engine cleaning process.

MOTUL Engine Clean added in the motor oil before replacement allows you to:

• Reduce wear
• Reduce oil and fuel consumption
• Increase compression and even compression in cylinders
• Reduce the level of hazardous emissions
• Remove deposits, lacquers and other combustion products from problematic areas such as hydraulic lash adjusters, valves, valve oil seals, etc.
• Get the maximum output from the newly filled oil
• Extend the service life of the catalyst

Before each motor oil replacement, add on dosage of MOTUL Engine Clean in the old oil of the warmed-up engine. Let the engine run in the idle run mode within 15 minutes. Drain the old oil and replace the oil filter. One dosage of MOTUL Engine Clean is enough for 5 liters of oil. In case of a big oil volume, add 60 ml of MOTUL Engine Clean for each additional liter. If the engine is too dirty, do not increase the dosage but conduct the procedure twice. Application of MOTUL Engine Clean together with MOTUL Diesel System clean or MOTUL Fuel System Clean results in reduced hazardous emissions (reduced CO2 etc.). It is specially recommended before the maintenance service.