Aerosol cleaners G-Power GP-501

Throttle and carburetor cleaner. A professional cleaner of parts of electronic and mechanical throttles, carburetors and idle run control valves. It quickly dissolves and removes soot, lacquer, resin and greasy deposits without disassembly of the units. It efficiently cleans internal air valves. It restores the efficient engine operation: it ensures smooth start, even idle run without failures. Instructions for application: Throttle cleaning: Dismantle the unit. Spray the cleaner on the external and internal parts, in air channels, flap actuator. Wait for 5 minutes. Spray repeatedly to remove dirt. Carburetor cleaning: Work with the stopped engine. Remove an air filter. Spray the cleaner on external part and arms of the carburetor. Wait for 5 minutes. Spray again. Start the engine and spray the cleaner in the carburetor at higher revolutions. Avoid cleaner contact with the outlet manifold and the catalytic convertor! Composition: Mixture of aliphatic and aromatic hydrocarbons, propane-butane. Safety measures: Flammable. The bottle is under pressure. Do not spray near the open fire. Do not inhale the gases. Do not puncture and do not disassemble. Use and store in a dry, cool, well ventilated room. If in eyes, thoroughly wash them with water. If on skin, wash off with soap. If swallowed, do not induce vomiting and immediately contact a doctor. Prevent heating more than 50°C. Keep out of the reach of children and pets. ATTENTION: Do not use on a hot engine! Avoid contact with painted, plastic, rubber and heated surfaces.