Anti-corrosive compound Liqui Moly 6104

Anti-corrosive agent wax/resin (brown/transparent). Wachs-Korrosions-Schutz braun/transparent. For application on coatings to protect against corrosion; basis: wax, ethers, resins, solvents and special inhibitors. Thanks to excellent fluidity, the product easily penetrates in hard-to-reach cavities (e.g., cavities, welded joints), requiring protection from corrosion, and impregnates rust, preventing its further development. The film formed after drying has good adhesion and anti-corrosive properties; the spray fluid almost does not drain from cavities. The product is used, first of all, for preservation and preventive protection during repair and for final finishing treatment of auto parts, construction and agricultural machines. The product can be used for the driving gear (axles, suspension, springs, etc.). The application results in the optimum anti-corrosive protection of the parts. Application. It is used for long-term protection of car surfaces and hidden cavities during preservation, as well as of the engine compartment where rust can appear. Clean the surfaces well before application. Rust must be removed. The surfaces must be dry and free of dirt, grease and dust. It is better to apply the product at a normal temperature. Thoroughly shake the bottle within 1 minute. Hold the bottle vertically while spraying. Spray the compound in a thin layer from the distance of about 20 - 30 cm. The thicker the layer is, the more resistant against wear and corrosion it is. Spray 1 or 2 times more in a short intervals. Attention! The product must not be applied on the parts of the brake and exhaust systems. It is not recommended for the cardan shaft as it can deteriorate its balance.